Lut Control (Short Ascii Command List) - JAI GO-5101M-PMCL-1 User Manual

GO-5101M-PMCL-1 | GO-5101C-PMCL-1 | User Manual (Ver. 1.0)
Name
BalanceWhiteAuto
LUT Control (Short ASCII Command List)
Note: Descriptions of each command can also be found in
Name Access
LUTValueRed R/W
LUTValueGreen
R/W
(Mono)
LUTValueBlue R/W
Short
Access Values
ASCII
0: Off
1: Once
2: Continuous
R/W AWB 3: 4600K
4: 5600K
5: 6500K
Else : Off
Short
Values
ASCII
Param 1: LUT index (0 ~
256)
LUTR
Param 2:LUTdata
(0 ~ 4095)
Param 1: LUT index (0 ~
256)
LUTG
Param 2:LUTdata
(0 ~ 4095)
Param 1: LUT index (0 ~
256)
LUTB
Param 2:LUTdata
(0 ~ 4095)
DEFAULT
AWB=[Param.]<CR><LF>
AWB?<CR><LF>
Set the auto white balance mode.
0
Note: Color model only
"LUT Control" (Setting List).
DEFAULT
LUTR=[Param1],[Param2]<CR><LF>
LUTR?[Param1]<CR><LF>
γ=1 equivalent
Set the LUT value for the red output signal.
value
Note: Color model only
LUTG=[Param1],[Param2]<CR><LF>
LUTG?[Param1]<CR><LF>
γ=1 equivalent
Color model: Set the LUT value for the green
value
output signal.
Mono model: Set the LUT value for the image
output signal.
LUTB=[Param1],[Param2]<CR><LF>
LUTB?[Param1]<CR><LF>
γ=1 equivalent
Set the LUT value for the red output signal.
value
Note: Color model only
- 92 -
Short ASCII Command List
Description
Description