Table of Contents
Advertisement
10.SYSTEM MODE
3) Display check
Start checking by pressing each button (BACK LIGHT, BRIGHTNESS, COLOR or LINE).
BACK LIGHT
BRIGHTNESS
COLOR
LINE
Press
PAGE
after checking each item respectively.
(Press
BACK
4) Input/Output check
Check external input/output signal.
Signal are outputted via pin 17 ~ 24 and 42 ~ 49 in turn
of control I/O connector on the rear panel by pressing
START
Output signals are stopped by pressing
The input status "-" show "0" when signals are inputted
via control I/O pin 2~9, 11~14, 27~34 and 36~39 on the
rear panel.
5) BCD out check (BCO)
6) BCD in check (BCI)
7) D/A check (DAC)
BCD output board check (BCO)
Check I/O signal of the BCD parallel data output serial interface.
Signals are outputted via pin 2~18 and 20~26 in turn of BCD output connector on the rear panel by
pressing
START
The indication of output status "-" changes to "0".
Output signals are stopped by pressing
The input status "-" shows "0" when signals are inputted via pin 27 ~ 34 of the BCD output connector
on the rear panel.
70
Press
BACK - LIGHT
Screen turns lighter by pressing
Color changes in turn. White → Black → Red → Green → Blue.
Displays Lateral strip → Verticl strip in turn.
to proceed to the next page
to return to the previous page.)
. The output status "-" show "0".
These are only indicated when option board is mounted.
.
tag, turns dark, touch screen returns to display check.
. It turns darker by pressing
LIGHT
.
STOP
.
STOP
.
DARK
Advertisement
Table of Contents
