Unipulse F805AT-CK Operation Manual page 19

2.APPEARANCE DESCRIPTION
UNDER
RESULT
COUNT DISPLAY Display the OK count and the error count.
Main display change
Each time the button is pressed, the weight value on the main display is switched.
GROSS
【Message screen】
Shift to Graph screen.
Main display, Status display
Same as the COMPARISON screen.
Message display
The contents of display are switched by pressing the
Error status → Weighing status display → Set values display → Blank display
Error status
8
Displays the calculation result of FINAL SETTING - UNDER SETTING.
The screen is switched to the UNDER setting screen by pressing the button.
Displays the result of weighing.
The display is switched between the result of weighing and the error in weighing
by pressing the button.
The error count display becomes LO display on the【Comparison screen】 on
Page6.
Each time the LO part is pressed, switching is done between HI, LO and NG.
HI: displays the HI count.
LO: displays the LO count.
NG: displays the sum of the HI count and LO count.
NET ERROR →
→ →
Digital Zero is carried out.
(TARE for displays other than GROSS.)
Displays the details in the case of a calibration error and over scale.
RESULT
Main display change
Shift to Setting
mode selection display.
Main display
Status display
Message display
key at the lower right.