9.GRAPHIC SCREEN
9. GRAPHIC SCREEN
9-1. Graphic Drawing Point
X-axis:
X-axis is for time setting.
One displayed drawing is between inputting start to the set time of X.
Drawing is consisted of 240 points, except 0 point.
The set time is divided by 240 drawing points, and represented value of each time will be
shown on the graph screen.
Y-axis:
Y-axis is for load setting.
It shows the loads between the start set point to the end.
Drawing is consisted of 140 points, except 0 point.
Y end point
X, Ystart point
9-2. Graphic Display
When you press
Y-axis
Switches ON/OFF
the cursor.
64
140
Display area
on the Message Screen, it change to [GRAPH].
MESSAGE
Indicated value
(Displays cursor-point value when cuasor is ON.)
Value at Y-end
Move the cursor from side to side.
The cursor moves at high speed
when it is kept pressed for a fixed time.
240
X end point
Displays the weighing mode.
Displays the current
weighing status.
(Displays cursor-point state
when cuasor is ON.)
X-axis
Value at X-end
Cursor ON:
It displays
RELATIVE/ABSOLUTE.
Starts drawing
Cursor OFF:
a graph.
Drawing time display.
Display is cleared
when it reaches to 99999ms.
Then restart counting from 0ms.