Table of Contents
Advertisement
6.FUNCTION SETTING
6-2-10. I/O monitor display
The view as popup which can monitor the operation state of an external I/O signal by pushing a
specific domain is performed. Select Effect or inhibit.
- INHIBIT................ A view as popup is not performed.
- EFFECT ................ If a specific domain is pushed in a comparison screen, a pop-up screen will be
A push on a specific domain will display a pop-up
screen.
The inside of a pop-up display becomes the display
interlocked with the operation state of the output pin
(17-24 and 42-49 pin) / input pin (2-9, 11-14, 27-34,
and 36-39 pin) of control I/O.
It is displayed by " ● " at the time of ON, and is
displayed by "-" at the time of OFF.
A screen will be closed if a specific domain is pushed
into a pop-up display.
* In the state where the pop-up screen is displayed, if
this setup is repealed with a communication command etc., a pop-up screen will be closed.
Operation
Press
MODE
Select INHIBIT/ TARE KEY ON
46
displayed.
In order to close a pop-up screen, please push the inside of a pop-up screen.
EXTENDED FUNC.
→
I/O MONITOR DISPLAY
→
OK
→
specific
domain
pop-up
display
specific
domain
→
Advertisement
Table of Contents
