Unipulse F805AT-CK Operation Manual page 118

RS-232C communication interface
Weight data, status and set values can be written or read by a host computer.
Signal level:
Transmitting distance:
Transmitting method:
Transmitting speed:
Bit configuration:
Code:
Option
(Number of mountable options: 4. However, the maximum number of serial communication interfaces is 1.)
OP1: BCD parallel data output interface (BCO)
Transmits weight data to a PLC or other BCD devices.
Output signal:
Output logic:
Output circuit:
Input signal:
Input circuit:
OP2: BCD parallel data input interface (BCI)
Receives commands from a BCD device.
Input data:
Input mode:
Input circuit:
OP3: D/A converter interface (DAC)
Weight data converted to an analog signal.
Current output:
D/A conversion speed:
Resolution:
Over range:
Serial communication interface option
OP4: RS-485 serial communication interface (485)
Addressable serial communication for connecting multi units.
Signal level:
Transmission distance:
OP5: CC-Link interface (CCL)
Links directly to Mitsubishi Control & Communication Link.
CC-Link I/F operates as the remote device stations corresponding to CC-Link Ver.1.10.
OP6: DeviceNet interface (ODN)
Connects seamlessly to Allen-Bradley, Omron CompoBus/D which is based on DeviceNet.
Based on RS-232C
Approx. 15m (16.41 yards)
Asynchronous
1200, 2400, 4800, 9600, 19200 or 384200 selectable.
Start 1bit
Character length 7 or 8bits selectable.
Stop 1 or 2bits selectable.
Parity none, odd or even selectable.
ASCII
Weight data (5 digits), sign, over, strobe, printing command.
Positive/ Negative selectable.
Open-collector (Vceo=30V max., Ic=50mA max.)
Logic switching, hold, output data selection.
Operated by a contact or an open-collector circuit (Ic=10mA min.).
BCD data (5 digits)
Level/ Edge selectable.
Operated by a contact or an open-collector circuit (Ic=10mA min.).
4 ~ 20mA
200 times/sec.
16bit
Full scale +/-10%
Current 2.4 ~ 21.6mA
RS-485
Approx. 1km (1,094 yards)
18.SPECIFICATIONS
107