Unipulse F805AT-CK Operation Manual page 23

2.APPEARANCE DESCRIPTION
④ Option slot
Up to 4 option board can be installed.
Concerning serial communication system only one board can be installed.
- BCD Parallel data output
- BCD Parallel data input
- D/A Converter
⑤ RS-232 connector
RS-232 connector for receiving and transmitting weight data, status information and so on.
The adaptable plug is OMRON XM3D-0921 (Cover: XM2S-0913 with #4-40 screw) or its equivalent.
⑥ LOCK switch
Lock switch is for disabling changes in calibration and setting values. While switch is ON could not do
calibration.
⑦ Control signal Input/Output connector
Connector for performing control input and output signal. The adaptable plug is DDK 57-30500
(attached to the F805AT-CK) or its equivalent.
⑧ SI/FII terminal block
Higher speed bi-direction 2-wire serial interface is a network solution for connecting weighing
controllers, data converters, printer and remote displays up to 20 devices.
⑨ SI/F terminal block
2-wire Serial interface is to connect Unipulse peripheral equipment such as printer, remote display.
⑩ Load cell connector
7-pin round connector for 6-wire connection with load cells, adaptable plug is Hirose JR16PN-7S or its
equivalent.
12
(Serial Communication System)
- RS-485
- CC-Link
- DeviceNet