Figure 18 Hdd Installation (Tool-Less); Figure 19 Hdd Removal (Tool-Less) - Chenbro RM437 Series User Manual

RM437 Series

Figure 18 HDD Installation (Tool-less)

1. Slide in the HDD until it aligns with the anchor point of HDD tray as shown.
2. Push down the HDD when it is locked with a click.

Figure 19 HDD Removal (Tool-less)

1. Press with two thumbs on the square surface of the HDD as shown and pull it upward.
2. Remove the HDD from the tray.
NOTE: Please operate this on a stable surface in case the HDD drops unexpectedly.
λ
System Components Removal and Installation|24