Table of Contents
Advertisement
1. Insert the HDD tray into the cage.
2. Push down the lever to secure the HDD tray.
1. Engage two embossed pins into the side dimples on the HDD as shown.
2. Carefully push down the other side of the HDD until another two embossed pins and side dimples lock into place.
NOTE:
Due to degraded performance and reliability concerns, the use of the 3.5" drive tray as a 2.5" drive tray is intended to
support SSD type storage devices only. Installing a 2.5" hard disk drive into the 3.5" drive tray cannot be supported.
Figure 25 3.5" HDD tray installation
Figure 26 3.5" HDD installation (tool-less type)
SR113 Family
Advertisement
Table of Contents
