Chenbro RM437 Series User Manual page 36

RM437 Series
Figure 39 HDD Cage Installation (Left)
1. Align the guide pins of the HDD cage with the grooves on the chassis base as shown.
2. Slide the HDD cage inward until it locks.
3. Secure it with the 6 screws as shown.
Figure 40 HDD Cage Installation (Right)
1. Align the guide pins of the HDD cage with the grooves on the chassis base as shown.
2. Slide the HDD cage inward until it locks.
3. Secure it with the 6 screws as shown.
System Components Removal and Installation|36