Table 13 Connector And Pin Header Function Description - Chenbro RM437 Series User Manual

Label Description
A Power
B Mini-SAS HD
C I C
2
D Slimline
E DIP switch
Figure 47 Backplane Rear View

Table 13 Connector and Pin Header Function Description

Description
The backplane includes two power connectors supplying 12V
input to the backplane. Power is routed to the backplane via a
power cable harness from the power supply.
The backplane includes three multi-ports Mini-SAS HD
connectors providing data signals for four SATA/SAS drives
on the backplane. A cable can be routed from matching
connectors on the add-in SATA/SAS HBA cards.
The backplane includes three 4-pin connector used as a
management interface to the server board.
The backplane includes four ports Slimline connectors
providing data signals for eight NVMe(U.2) drives drives on
the backplane.
Follow below dip switch setting
RM437 Series
Drawing
Backplane|44