Table 27 Connector And Pin Header Function Description - Chenbro RM437 Series User Manual

Label Connector
A Power
B Slimline 4i
C I
2
D DIP switch
Figure 52 Backplane Rear View

Table 27 Connector and Pin Header Function Description

Description
The backplane includes one power
connector supplying 5V/12V input to
the backplane. Power is routed to the
backplane via a power cable harness
from the power supply.
The backplane includes two Slimline
4i connectors providing data signals
for two NVMe drives on the
backplane.
C The backplane includes one 4-pin
connector used as a management
interface to the server board.
Follow below dip switch setting
RM437 Series
Drawing
Backplane|52