Figure 23 3.5" Hdd Installation (Tool-Less Type); Figure 24 3.5" Hdd Installation (Screw Type) - Chenbro SR105 Plus Series User Manual

1. Engage two embossed pins with the side dimples on the HDD as shown.
2. Carefully push down the other side of the HDD until another two embossed pins and side dimples lock into place.
NOTE: Due to degraded performance and reliability concerns, the use of the 3.5" drive tray as a 2.5" drive tray is intended to
support SSD type storage devices only. Installing a 2.5" hard disk drive into the 3.5" drive tray cannot be supported.
1. Align the front of HDD with the anchor point on the tray.
2. Assemble 3.5" HDD with tray by four screws as shown.

Figure 23 3.5" HDD installation (tool-less type)

Figure 24 3.5" HDD installation (screw type)

SR105 Plus Series
22
│