OptoSigma SRC-101 Instruction Manual page 9

for
This device uses FTDI's FT232
the driver on the PC side.
The following example describes the installation procedure
is a registered trademark of
Windows
(1) Access FTDI's website (http://www.ftdichip.com/index.html)
(2) Download the driver corresponding to
(Please note that the structure of the homepage may change.) ）
(3) Unzip the zip file
Download example
(
(4) Connect the USB mini-B male)
USB-to-serial conversion. To control this device by a computer, you must first install
of
Driver Ver.2.08.08
Microsoft Corporation in the United States and other countries.
the Drivers
OS from > VCP Drivers > the left item
Defrosting
example
end of the USB cable to the
9
for
Windows 32bit.
.
USB connector on the rear panel of the device.
Copyright 2012, OptoSigma Inc.