OptoSigma SRC-101 Instruction Manual page 18

ACK2
ACK3
e.g.)
Q:
1000,K,L,R
(Results) Coordinate value 1000
* Since there is no position feedback, there is no reproducibility for position. Coordinate values are reference
values only
Therefore, please be take note.
! Command (Status Confirmation 2)
(10)
・Command format
!:
・Return data format
B
R
・Explanation
Sends the stage movement status ( ACK3 of Q command return data
?:V command (software version check instruction)
(11)
・Command format
?:V
・Return data format (example)
V01.00
・ We will send back the commentary software version. In the
, it
example is Ver.1.00.
?:S command (speed check instruction)
(12)
・Command format
?:S
・Return data format (example)
3210 S C W , S
OUTH RODDY AY
K Command Successful Reception
L Overload (stroke end) stop
K Normal stop
B
、
busy state L
possible
R Ready state
Status check
Return data
,
command successful reception
busy state
L 、 Q 、 ! Command
acceptance possible
Ready state All commands can be
accepted
18
O S C
PTO IGMA ORPORATION
A , C 92704 USA, TEL. 949-851-5881, E-
ANTA NA ALIFORNIA
Q、! 、? Command acceptance
accepts all commands
,
overload detection, ready state
) from this device
.
MAIL SALES
@ .
OPTOSIGMA COM