Before use, please read this "For safe
that should be observed in order to prevent harm to users and others and damage to property, and to use it safely.
After reading this manual, please be able to view it at any time when using this product.
The warning labels are intended to help you use this product safely and correctly, and to prevent harm or damage that may be inflicted on you or
others. Please read this manual after understanding the contents.
Warning
!
Ignoring this indication indicates that mishandling could result in
death or serious injury to the user.
(1) The Company shall not be liable for any incidental damages arising from the use or inability to use this product.
(2) The Company shall not be liable for any damage caused by usage other than those described in the instruction manual.
(3) Damage caused by fire, earthquake, act by a third party, other accident, intentional or negligent act of the user, misuse, or use under other
abnormal conditions.
The Company shall not be liable for any such matters.
● Flammable gas, explosive or corrosive places, moisture or humid places,
breathable
Do not use in bad places or near flammable materials.
● Do not connect or inspect in an energized state.
● Installa on (installa on) and connec on work should be performed by a
technician with specialized knowledge.
● Do not touch the inside of the device at all.
● Power cables, motor cables, and connec on cables can be bent or pulled,
Do not damage or process.
● If there is an abnormal smell, overhea ng, heat genera on, or abnormal
noise, turn off the power.
● If the device is dropped or subjected to a strong impact, do not turn on the
power.
● Please use a dry cloth for cleaning.
● Do not operate with wet hands or other actions that may cause electric shock.
● For places with vibra on, sealed places, places exposed to direct sunlight, etc.
Do not leave it unattended.
For safe use
use
and "
"
Instruction manual" carefully and use it correctly. This manual indicates the matters
About warning displays
Ignoring this indication indicates content that may result in
personal injury and that may cause property damage.
Disclaimer
Cautionary note
!
● When unplugging the power plug, hold the power plug without pulling the
power cable
Please unplug.
● Even if the power is turned off, there is residual voltage, so touch the input /
output terminals for
Please don't.
● Before connec ng the equipment material, the ini al se ng
parameter
(
settings).
● Please connect the equipment after turning off the input power.
● Turn on the power (opera on) with the power turned off immediately when
an abnormality occurs
Please.
● Never disassemble, modify, repair, etc.
● Do not use outdoors.
3
Attention
!
!
about
seconds.
10
.
Copyright 2012, OptoSigma Inc.
Need help?
Do you have a question about the SRC-101 and is the answer not in the manual?