Name And Function Of Each Part - OptoSigma SRC-101 Instruction Manual

2. Overview
The SRC-101 (this device) is a dedicated controller for remote actuator drive. Micrometer-like micro-movements with
fine movement knobs and simple manual operation with JOG switches are possible. It is also
actuator by connecting to a commercially available PC

3. Name and function of each part

3-1. Name of each part
(1) Speed shift
knob
3-2. Functions of each part
(1) Gear shift knob
②RUN LED
② RUN LED
③ STOP LED
⑥USBconnector ⑦Motor Connectors
This knob sets the operating speed of the actuator. Overloads can be detected at
the silver scale. (*The scale is only a guide)
during actuator operation
The green LED lights up
5
possible to control the
via a USB interface and sending commands from the PC.
(5) Fine
movement knob
④ JOG switch
⑧Power
terminals
.
Copyright 2012, OptoSigma Inc.
⑨Power switch