Page 1
SC29302-K13-18002B JOY STICK CONTROLLER JS-301 User’s Manual...
Page 2
SC29302-K13-18002B Notes regarding these materials ・ These materials are intended as a reference to assist our customers in the use of the SIGMAKOKI CO., LTD. Product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to SIGMAKOKI CO., LTD.
Page 3
SC29302-K13-18002B For Your Safety Before using this product, read this manual and all warnings or cautions in the documentation provided. Only Factory Authorized Personnel should be changes and/or adjust the parts of controller. The Symbols Used in This Manual WARNING CAUTION This symbol marks warnings that should be read...
Page 4
SC29302-K13-18002B Disclaimer of Liability ① SIGMAKOKI CO., LTD. does not accept liability for damages resulting from the use of this product or the inability to use this product. ② SIGMAKOKI CO., LTD. does not accept liability for damages resulting from the use of this product that deviates from that described in the manual.
SC29302-K13-18002B ontents Chapter 1: Before You Begin ...................... 6 1-1. Overview..........................6 1-2. Connecting method ......................7 Chapter 2: Notes on Use ......................8 2-1. Name of each part ......................8 2-2. Operating method ......................9 2-3. Checking and Setting Memory Switches ..............11 Chapter 3: Specifications ......................
This product is connected to the controller with MDR14-CA cable. ① Connect a standard cable (MDR14-CA-*) to the connector on the rear panel of the JS-301. ② Connect the cable from the JS-301 to the “JOYSTICK” or “OPTION” of the connector on the front panel of the SHOT-30X series, PGC-04-U and SHRC-203 controller.
SC29302-K13-18002B Chapter 2: Notes on Use 2-1. Name of each part ①LCD panel ②MODE button ⑩STOP button ③E-ORG button ⑨SPEED button ④ZERO button SPEED LED ⑧Third axis operation switch ⑤Axis select button ⑥Joystick ⑦M-ORG button Fig.2-1 Name of each part...
SC29302-K13-18002B 2-2. Operating method ① LCD panel Position coordinates MODE A sign± unit AXIS 1 AXIS 2 limit sensor ± AXIS 3 AXIS 4 Fig.2-2-1 Display content example SPEED L=limit sensor ※When you disconnected stage,displayed "+ -". unit: p = [pulse] u = [μm] d = [°] s = [μm]...
Page 10
SC29302-K13-18002B ⑥Joystick Enables operation of “1 and 2 axis” or “3 and 4 axis”. A move of the joystick continuously moves the stage continuously. Releasing the stick stops the stage. Move the joystick again after putting the joystick in neutral for over a second when inverting moving direction of each axis.
SC29302-K13-18002B 2-3. Checking and Setting Memory Switches This product able to change memory switch of SHOT-302GS/SHOT-304GS/SHOT-702H controller of the memory switch controller. NOTE) This function is only usable with SHOT-302GS/SHOT-304GS and SHOT-702H. (*) For more information about memory switch, refer to User’s manual of SHOT- 302GS/SHOT-304GS and SHOT-702H.
SC29302-K13-18002B Chapter 3: Specifications 3-1. Specifications Display function LCD 16 digit × 4 lines Power supply Supplied from the controller via connection cable Operating temperature 5~40℃ Storage temperature -20~60℃ Altitude up to 2000m Indoor use only Ⅱ Installation category Pollution degree Ambient humidity 20~80%RH (no condensation) External dimensions...