Example 2: Changing Settings - Siemens SIPROTEC 5 V9.30 Manual

[scexport1, 1, en_US]
Figure 7-59
In the following dialog, select whether you wish to open or save the exported data.
²
Once you have saved, the content of the log will be available to you outside the device.

Example 2: Changing Settings

7.4.3
In this example, the vector group number in the function group Transformer page is changed using the
browser-based user interface.
Log on to the device via a Web browser.
²
In the Engineering menu, select the Settings button.
²
[scwebmonitorEK, 2, en_US]
Figure 7-60
Click the buttons Transformer side 1 → General → Side data one after the other.
²
NOTE
i i
You can also select the individual menu items via the list box.
[sctransf4_kompl, 1, en_US]
Figure 7-61
In the selection dialog, select the new vector-group number.
²
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-J, Edition 07.2022
Export of the Log Content
Settings Button
Function-Group Buttons
Operation Using a Browser-Based User Interface
7.4 Examples
151