Siemens SIPROTEC 5 V9.30 Manual page 105

Example of a Transformer Tap Changer
You can also use a binary input to display the tap position of the transformer tap changer. In this case, you
must set the X (routed) property in the DIGSI 5 Information routing (see figure below). X (routed) means that
the binary input was routed.
[scranma3-260814-01, 1, en_US]
Figure 5-20
The figure below shows that binary input 1.1 displays the tap position of transformer tap changer 1.
[scbinipt3-260814-01, 1, en_US]
Figure 5-21
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-J, Edition 07.2022
Example of Transformer Tap Changer 1
Setting of Transformer Tap Changer 1
Using On-Site Operation Panel
5.8 Display of Routings and Status
105