Maintenance, On-the-Spot Assistance and Test
10.4 Update Firmware and Configuration
Loading the Updated Configuration
Finally, you must load the updated configuration in the devices. There are 2 possibilities to do this.
To update multiple devices, proceed as follows:
•
In the project tree, select the Load configuration in devices menu item.
•
Select the devices that are to be updated.
[sc_upgpa3-041119, 1, en_US]
Figure 10-20
•
As needed, enter a confirmation ID or additional passwords in the columns provided.
•
Click Update device(s).
If the data has been successfully transferred, the devices restart.
- or -
To update a device, proceed as follows:
•
Select the device in the project tree.
•
Open the context menu.
•
Select the Load configuration to device menu item.
272
Loading Configuration
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-J, Edition 07.2022