Siemens SIPROTEC 5 V9.30 Manual page 191

[scmotmlp-160713-01, 2, en_US]
Figure 8-35
Reading on the Device through the On-Site Operation Panel
•
To reach the motor-starting log from the main menu, use the navigation keys of the on-site operation
panel.
Main Menu → Indications → Motor-starting log
•
You can navigate within the displayed indication list using the navigation keys (up/down) on the on-site
operation panel.
[ScMotLog-280618, 1, en_US]
Figure 8-36
Deletability
The motor-starting log of your SIPROTEC 5 device can be deleted. Read details about this in chapter
8.5.13 Saving and Deleting the
Configurability
The motor-starting log is only present in the Motor function group. There is no column for the motor-starting
log in the DIGSI information routing. The entries in the motor-starting log are preconfigured and cannot be
changed.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-J, Edition 07.2022
Reading the Motor-Starting Log with DIGSI 5
Reading the Motor-Starting Log on the On-Site Operation Panel of the Device
Logs.
Operation in the Operating State
8.5 Logs
191