Table of Contents
Advertisement
Checking time synchronization
²
The device is synchronized by a maximum of 2 independent time sources. In online mode, first click in
the project tree on Device information then on the tab Time information. The delivered specific values
(UTC) of the 1st and 2nd time source (if available) are shown. The internal time of the device which
results from the time information of the active time source is likewise shown.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-J, Edition 07.2022
Commissioning
9.3 Initial Startup
243
Advertisement
Table of Contents
