Wiring Example For The Factory Settings - Siemens Sinamics G110M Getting Started
Distributed converter for simogear geared motors
Hide thumbs
Also See for Sinamics G110M:
- Operating instructions manual (428 pages) ,
- Original instructions manual (344 pages) ,
- Function manual (244 pages)
Table of Contents
Advertisement
Commissioning
4.2 Wiring example for the factory settings
Table 4- 1
Component or tool
Operator Panel
Optical cable
STARTER
StartDrive
PC Connection Kit Contains the 3 m USB cable necessary to
SD card
Internet: STARTER download
1)
(http://support.automation.siemens.com/WW/view/en/26233208)
Internet:StartDrive download
2)
(http://support.automation.siemens.com/WW/view/en/68034568)
4.2
Wiring example for the factory settings
To ensure that the factory setting can be used, you must wire your drive as shown in the
following examples.
Image 4-2
60
Components and tools for commissioning and data backup
IOP Handheld Kit - Version 1.5 or later
Required for using IOP Handheld Kit with
CU240M
Commissioning tool (PC software) - Version
1)
4.3.3 or later
Commissioning tool (PC software) - Version
2)
12 or later
connect your converter to a PC.
Optional memory card for storing and trans-
ferring the converter settings
Macro 29 - Conveyer with potentiometer and fixed setpoint (Default USS)
Article number
6SL3255-0AA00-4HA0
3RK1922-2BP00
DVD: 6SL3072-0AA00-0AG0
DVD: 6SL3072-4CA02-1XG0
6SL3255-0AA00-2CA0
6SL3054-4AG00-2AA0
Distributed converter for SIMOGEAR geared motors
Getting Started, 01/2016, FW V4.7.6, A5E36100338B AD
Advertisement
Table of Contents
