Table of Contents
Advertisement
[dw_first and second device row, 1, en_US]
Figure 3-11
Siemens recommends a hole spacing of at least 55 mm (2.17 in) between the 1st and 2nd device rows. The
maximum spacing may be about 80 mm (3.15 in) due to the length of the connecting cable. The length of the
cable is 890 mm (35.04 in) from the center of the plug to the center of the connector.
[dw_angle rail, 1, en_US]
Figure 3-12
Table 3-1
1/3 device (base module)
1/2 device (base module with one expansion module) 221
2/3 device (base module with 2 expansion modules)
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-J, Edition 07.2022
Drilling Pattern - 1/1 Device, 1st and 2nd Device Row
Angle Rail for Connecting the 1st and 2nd Device Row
Cut-Out Widths
Width of the Mounting Opening
146
+2
mm (5.75
+0.08
)
+2
mm (8.7
+0.08
)
296
+2
mm (11.65
+0.08
)
Fitting the Devices
3.1 Flush-Mounting Devices
45
Advertisement
Table of Contents
