Siemens SIPROTEC 5 V9.30 Manual page 86

Using On-Site Operation Panel
5.2 Overview of Operator Controls and Display Elements
Operator control/display
element
86
Function
•
Left
– To the previous page (sequence as laid down in DIGSI 5)
Navigational aid
The footer of the display shows you the authorized navigation directions
depending on current display level.
Selection dialogs:
In selection dialogs, you are offered selection options one below the other.
Example parameter Mode (Off/On/Test).
•
Top
– Select top entry
Automatic line break from the first to the last entry
•
Bottom
– Select bottom entry
Automatic line break from the last to the first entry
Numerical input dialog:
In a numeric command prompt (for example, confirmation ID), the cursor
appears right-aligned.
•
Left
– Backspace key which puts the cursor back by one position. You
must reenter all skipped places by using the numeric keys.
Contrast setting:
The contrast is adjusted using the navigation keys only.
•
Left and right simultaneously
– Jump to the Contrast menu
•
Right
– More contrast
•
Left
– Less contrast
•
Top and bottom simultaneously
– Restoring factory setting
Softkeys
The softkeys are located on the left and right below the display. They are
used to confirm command prompts in the display. Context-sensitive actions
can always be triggered with the softkeys.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-J, Edition 07.2022