Table of Contents
Advertisement
Operator control/display
element
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-J, Edition 07.2022
5.2 Overview of Operator Controls and Display Elements
Function
Numerical keys and convertible function keys
This keypad is used for the input of numeric values (with or without
decimal point). You can activate actions of function keys using these keys.
The keys <1> to <9> are double assigned for number entry and the func-
tionality of function keys. To activate the function keys, press the <Fn> key
(<F1> to <F9> in blue font).
Numerical keys
These keys are used to input values and navigate in menus. According to
the numbering on the right display edge, you can jump directly into
submenus or carry out settings.
Function Keys <F1> to <F9>
You can perform configured actions with DIGSI 5 using the function keys.
For standard actions (for example, reading of the operational log on site),
this means a simplification. The following configurations for the function
keys are possible:
•
Jump to a specific menu
•
Jump to a specific log
•
Activation of a binary input indication (for example, start fault record,
test binary inputs)
•
An adjustable function key mode is offered by the Toggle (edge-trig-
gered activation and termination) and Pulse (with activation time)
modes and the ON and OFF mode.
Hint on the Toggle function key mode:
The default setting of the value of information in startup is OFF, each
key press switches between the states ON and OFF.
When routing to switching objects (information type SPC or DPC), the
current switch position is not taken into account. This means that a
toggle command is not executed if the switching object is already in
this state.
•
<F9> cannot be configured and is always assigned to switching
between languages
Activating function keys:
There are several methods available to you to activate function keys
•
<Fn> + NUM LOCK key (simultaneously)
Example: <F1> = <Fn> key + <1> key
•
<Fn> key alone → jump to the function key menu, selection of
function key via navigation keys and confirmation with OK or directly
by numeric input
Using On-Site Operation Panel
87
Advertisement
Table of Contents
