Advanced Menu - Showven SPARKULAR WAVER User Manual

E6 Heat Fail
E7 Tip Over
3. Set Up Menu
Press "MENU" enter setup menu, press LEFT, RIGHT to choose main menu, advanced menu or
factory menu. Press "EDIT" can entering related menu and setting up related parameters.
4. Main Menu
Parameters in main menu show in below table, press "UP"/ "DOWN" to change the value, please
remember to press "SAVE" to save the setting.
Options
Set DMX Address
Manual Heat ON/OFF
Manual Fountain ON/OFF
Sequence
-90°~90°
Max. Angle
-90°~90°
Min. Angle
Invert ON/OFF
Head to middle ON/OFF

5. Advanced Menu

Options
Set Temperature
Auto Clear Delay
Wireless 2.4G
LCD Backlight
Heating fail, problem on heating PCB or mainboard
Tilt sensor activated when machine slant over 45 degrees
Range Default
1-512 1 Set DMX Address
Manual heat ON/OFF setting
OFF
Manual Fountain ON/OFF setting
OFF
Preset sequence setting
2 - 72 2
-90°
Max. Angle limit
90°
Min. Angle limit
When turned on, all angles will be mirrored.
OFF
When ON and Channel 1 DMX value is 0, output
nozzle will back to middle position after running a
ON
preset sequence.
Range
500-620
0.1-0.9s
ON/OFF
ON/OFF
- 6 -
Explanation
Default
Setup SPARKULAR
580
temperature
0.1s Automatic clear material time setting
OFF
2.4G wireless function setting
ON
LCD backlight setting
Explanation
"
heat chamber