Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Showven SPARKULAR FALL
Summary of Contents for Showven SPARKULAR FALL
-
Page 1: User Manual
SPARKULAR FALL USER MANUAL V1.1 Showven Technologies Co.,Ltd. - Page 2 》Ensure that children, animals and unauthorized persons don’t have access to the SPARKULAR FALL. 》Clear material for Sparkular Fall is necessary both before the show and after the show, to clear the Composite Ti remains in the pipe. Check whether there are Composite Ti aggregate in the nozzle after each show, if any, please clean it up, or it will affect the shooting effect or even damage Sparkular Fall.
- Page 3 Operating Panel: LCD information display area, showing operate menu and working status of machine. Light emitting diode display area： READY：After turning on machine, it will automatically preheat around 5 minutes, when the "READY" green light turns from flashing into long on, indicates that the machine is ready to work DMX ：Flashing shows that DMX signal is connected, otherwise is without signal FAULT：When any malfunction , the light turns on HEAT ：When the machine is heating, signal light turns on...
- Page 4 Radio frequency identification area： 》Composite Ti with RFID card, swiping cards used to identify parameters and types of granules. 》Please note that granules RFID card can increase the single machine specific working time. The card is disposable,one card can only use one time. Interface Main interface：...
- Page 5 MENU to switch to wireless control setting , menu is set to “ON” , press “ENTER”. In this interface, you can also match code with remote controller. 》Sparkular Fall can controlled by both DMX and remote controller, when there are DMX signal input, wireless remote controller will not work.
- Page 6 Enter into Set DMX Address option menu,press “-”when the DMX address is “1”to set the first unit of Sparkular Fall’s DMX address into “1++”, this machine address is “1”, but it can also output DMX signal and turns into wireless host Sparkular Fall. Use communication cables to connect all the Sparkular Fall, the host Sparkular Fall will receive the signal from remote controller and trans- fer to all other Sparkular Fall via communication cables to realize stable signal transmission.
- Page 7 3.Damage caused by external reasons (lightning strike, power supply etc); 4.Damage caused by improper installation or use; For product damage not included in warranty range, we can provide paid service. Invoice and warranty card are necessary when asking for maintenance service from SHOWVEN. ------------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Warranty card Product Name：...
- Page 8 Showven Technologies Co., Ltd Add: Building B1, Changsha E Center No.18, Xiangtai Road, Liuyang Economic Development Zone, Changsha City, 410300, Hunan Province, P.R.China. Tel: +86-731-83833068 Web: www.showven.cn E-mail: info@showven.cn...
Need help?
Do you have a question about the SPARKULAR FALL and is the answer not in the manual?
Questions and answers