Showven SPARKULAR WAVER User Manual page 3

Thanks for choosing SPARKULAR
Please read the following manual carefully before operating this product.
Safety Instructions
Δ
Unauthorized repair are prohibited, it may cause serious incident.
\
Please keep the device dry.
\
Make sure lid of feeding hopper are well covered when use SPARKULAR
\
Accidentally burning of consumable can only use sands to extinguish.
\
Consumable should keep away from moisture and stored in a dry sealed environment.
\
Check whether there is consumable aggregate in the output nozzle both before and after each
\
show, if any, please clean it up, or it will affect the firing effect, damage machine, even cause
serious incident.
There will be some sparks drop to ground, make sure there are no flammable objects such as
\
carpet on the ground within the safety radius of the machine.
\ Suggest to use HC8200 MEDIUM for indoor events.
"
The SPARKULAR WAVER power supply cable maximum allowed cascade of 6pcs (220V
\
version) / 3pcs (110V version), exceed connecting may result in damage or even cause fire.
Cover the output nozzle of SPARKULAR
\
each show, making sure no objects or material will block the output nozzle.
Never touch the nozzle of SPARKULAR
\
\ Never touch the sparks which shooting out from the nozzle.
Safety Distance
Safety distance for SPARKULAR® WAVER divided into two parts safety radius around machine
\
(a) and safety distance at firing direction (b). No person and flammable materials are allowed
to stay inside the safety isolation zone when SPARKULAR® WAVER was armed.
\ The safety radius around machine depends on effect height (consumable HC8200 type), with a
radius of 1m or 1.5m.
For safety distance at firing direction equals to maximum firing height + 1m. SPARKULAR®
\
WAVER with maximum ± 90 ° waving firing angles, when firing wave sequence the safety
isolation zone is a three-dimensional sector area.
HC8200 Type
Medium
LARGE
The SPARKULAR® WAVER safety isolation zone is a three-dimensional space with a cross-
\
section of 180° sector enclosed by a and b (check below diagram). We can understand it as a
safety area formed by a safety column with diameter of a, height of b rotate of ±90 degrees.
Unauthorized persons and objects are strictly prohibited from entering. Depending on the
firing sequence / angles the sector area changes accordingly.
For angled firing, the safety distance both around machine and firing direction should shift
\
accordingly.
"
WAVER, we wish it will sparks up your show.
"
WAVER is forbidden, inspect the machine before
"
WAVER danger of getting burnt.
Max. Effect Height
3.5m
4.5m
- 1 -
Safety Radius around
SPARKULAR (a)
1m
1.5m
"
WAVER.
Safety Distance at Firing
Direction (b)
4.5m
5.5m