Setting Menu; Advanced Menu - Showven SPARKULAR SPIN User Manual

Setting Menu:

Press "MENU"switch through setup menu.
Set DMX Address 1-512
Wireless Remote ON/OFF
Manual Fountain ON/OFF
Fountain Height 1-10
Spin Speed 60-100
LCD Backlight ON/OFF

Advanced Menu:

Press "MENU" 3 seconds to enter the advanced setup interface, press MENU key to enter different options,
wait 3 seconds to return to the main interface.
Options Range
Set Temperature ON/OFF
Auto Heat ON/OFF
Density 1-10
Factory Mode
Mode Selection
User Mode
2 Channel
DMX Channel Mode
4 Channel
Standby Switch ON/OFF
Set DMX address If controlled by Host Controller, please set DMX address as
1, 3, 5, 7,...2n-1, otherwise it may leads to signal interference
Wireless function ON/OFF
Manual firing ON/OFF, for test only
Manual firing height setup, for test only
Spinning speed setup
LCD light ON/OFF
Explanation
Wireless function ON/OFF
Manual firing ON/OFF, for test only
Manual firing height setup, for test only
Factory mode is for engineer only. When in Factory mode machine can't
controlled by DMX console/host controller
Channel mode set. 4 channel is for professional control with lighting console
Standby function. When ON, the machine can firing only when heating up
was finished
4