Inserting Labels - FP postbase vision Reference Manual

4.7

Inserting labels

Caution! We recommend to use only labels that have been approved by FP.
The manufacturer FP has established reliability, safety and applicability.
The manufacturer cannot assess the reliability, safety and applicability for
products not approved by FP, and therefore not vouch for such products.
We can ensure correct label processing only when you comply with this.
FP. "PostBase Vision User Manual (Full Reference Guide)." PostBase Vision Support Semi-Auto, Auto & Advanced, Apr. 2020,
download.fp-usa.com/product_docs/PostBase/Vision/Technical/PostBase_Vision_Reference_Guide_USA_Rev02_20200423.pdf.
To fold the label compartment out:
• Press on the knurled surface until you hear
a click, then release.
• Remove package band from the package
of labels.
• Insert the complete package (50 labels) in
the label compartment:
– The side to be printed on faces up.
– Insert the package of labels in direction
of the imprinted arrow as far as it will go.
Works Cited:
The basics of operation 51