FP postbase vision Reference Manual page 152

152 PostBase Vision
FP. "PostBase Vision User Manual (Full Reference Guide)." PostBase Vision Support Semi-Auto, Auto & Advanced, Apr. 2020,
download.fp-usa.com/product_docs/PostBase/Vision/Technical/PostBase_Vision_Reference_Guide_USA_Rev02_20200423.pdf.
Leg spring
• Clean the brush or replace it with a new
one.
• Moisten a new brush before inserting it.
• Hold the brush as shown in the figure:
– The bristles must face down.
– One leg of the leg spring is located in the
brush groove and the other leg in the
sword slot.
• Put the rear pin into the clip of the sword as
indicated by the arrow.
• Then carefully snap the front pin into the
clip of the sword.
• Push the roller transport down powerfully
until it locks into place.
Works Cited: