FP postbase vision Reference Manual page 121

Connectivity Settings and their meaning:
DHCP
DHCP = E
(default setting)
DHCP = D
Proxy-Server
P
ROXY
(default setting)
P
ROXY
FP. "PostBase Vision User Manual (Full Reference Guide)." PostBase Vision Support Semi-Auto, Auto & Advanced, Apr. 2020,
download.fp-usa.com/product_docs/PostBase/Vision/Technical/PostBase_Vision_Reference_Guide_USA_Rev02_20200423.pdf.
NABLED
ISABLED
= D
ISABLED
= E
NABLED
Advanced settings & system information
Dynamic Host Configuration Protocol.
Networking protocol that allows automatic con-
nection to a network.
Select this setting if your network supports
DHCP.
Select this setting if your network does not sup-
port DHCP.
During manual configuration, you will need to
enter the following parameters:
– Static IP address for your PostBase Vision
– Subnet mask
– Default gateway
– IP address of the DNS server.
Please contact your network administrator for
details.
Note: When entering IP addresses, you have to
enter the dots, too.
Intermediary server that facilitates access to the
internet.
Select this setting if your network does not use a
proxy server.
Select this setting if your network uses a proxy
server.
You will need to enter the following parameters:
– IP address of the proxy or its alias
– Port number.
Please contact your network administrator for
details.
Works Cited:
121