Standby Time; Product After Standby - FP postbase vision Reference Manual

114 PostBase Vision
14.8

Standby time

The PostBase Vision mailing system will go to standby automatically if it is not used
for some time. The standby time is the time between your last operation and the time
PostBase Vision automatically goes to standby.
14.9

Product after standby

This feature lets you define which product will be set for metering after reactivating
PostBase Vision from standby:
– the product stored as the first shortcut or
– the product that was last used.
R
ATE AFTER
FP. "PostBase Vision User Manual (Full Reference Guide)." PostBase Vision Support Semi-Auto, Auto & Advanced, Apr. 2020,
download.fp-usa.com/product_docs/PostBase/Vision/Technical/PostBase_Vision_Reference_Guide_USA_Rev02_20200423.pdf.
S – possible settings and their meaning:
TANDBY
S
HORTCUT
L R
AST
• Open the M
• Choose S
TANDBY
• Choose S
TANDBY
PostBase Vision opens the standby time
setting menu.
• Type the desired time (in minutes).
• Confirm with OK.
• Open the M
• Choose S
TANDBY
• Choose P
ROD
PostBase Vision opens the setting menu for
this function.
• Tap the desired setting.
• Apply the displayed setting by tapping OK.
1 After reactivating PostBase Vision from stand-
by, the product stored as first shortcut is set.
PostBase Vision keeps the current (last)
ATE
product setting.
Works Cited:
.
ENU
S .
ETTINGS
T .
IME
.
ENU
S .
ETTINGS
. S .
AFTER TANDBY