2.4.3 Model File Transfer
After generating the Gcode file, you can transfer it to your printer with different network
methods. If you choose to print from a USB flash drive, please insert the USB flash drive
with the target file into the USB port on the printer. There will be no need to set network
connection.
Method 1:
Wi-Fi Connection
1. Tap [Tools] - Tap [Network] - Tap [Wi-Fi].
Network
Setting
2. Choose a network and input the password.
WiFi
Choose a network
Flashforge
ChinaNet-AnCr
TP-LINK_EDC2
QS_1234
1/3
3. Open the FlashPrint software, click the icon at the bottom left corner of the interface to
select the [Machine Type], select [Adventurer 3 Pro 2]. Then click [Print] - [Connect Machine].
Preheat
About
123
Wi-Fi
Hot spot
Cloud
Ethernet
abc
17
WiFi
Flashforge
%#
Choose a network
ChinaNet-AnCr
TP-LINK_EDC2
QS_1234
1/3