Flilament Loading - Flashforge Adventurer 3 Pro 2 User Manual

3. After calibrating the first point, please follow the on-screen prompts to continue the
9-point automatic leveling.
Do you want to continue
and complete the
auto-calibration?
Yes
For specific operation, you can refer to the video. The link path
is as follows:
Flashforge's Official Website（www.flashforge.com）- Support-
Video Center - select [Operation Videos] - [Adventurer 3 Pro2].

2.4.2.2 Flilament Loading

1. Open the filament cover, insert the filament into the filament intake, push the filament
into the feeding wheel until some resistance is sensed.
Note: Please make sure the filament has been pushed into the feeding wheel!
No
0.00 0.00 0.00
0.00 0.00 0.00
0.00 0.00 0.00
Completed
14
Scan the QR code to
view the video.