Software Installation; First Printing; File Transfer: Wi-Fi Transfer; Printing From A Usb Flash Drive - Flashforge Guider 3 Plus User Manual

3. Software Installation

Method 1: Find the installation package of the FlashPrint software in the USB flash
drive and select the corresponding system version for installation.
Method 2: Download the latest slicing software installation package from our official
Chinese website [www.sz3dp.com] or our official English website
[www.flashforge.com] for installation.
3D printing process：
Get the model file－Slice it with the slicing software - Transfer the file to the printer
for printing.
Import the file to FlashPrint for slicing, select the machine type as Guider 3 Plus to
connect to it [or by entering the IP address or by automatic scanning, while the IP
address can be viewed in the [About] of the equipment]. After completing slicing,
send the file directly to the printer for printing.

4.2 Printing From a USB Flash Drive

The equipment can perform printing via a USB flash drive: save the sliced file to the
USB flash drive, insert the USB flash drive into the equipment, and select the
corresponding file to print.

4. First Printing

4.1 File Transfer: Wi-Fi Transfer

12