Model Processing - Flashforge Hunter User Manual

6. Tap [Print]
and then tap the middle
7. A list of file(s) will show up, press the file that you would like to print, then tap
[Yes].
8. The printer will now enter preheating phase and will start printing once it finishes
preheating
Printing via Wi-Fi
After the printer and computer have connected WiFi (Please refer to 5.2.13 ), load
the Gecod file in FlashPrint, then tap
Notice: Please close the cover while printing.

6.3 Model Processing

(6-6)After finish printing, please put on vinyl gloves and open the light shield,
hold the build plate and unscrew the platform screw, take out the build plate from
horizontal direction carefully.
Attention: Please put on vinyl gloves during operation,
Carefuly pour the used photopolymer resin into a clean bottle, it can
be recycled.
Photopolymer resin needs to be stored in a dark, dry and cool place.
Hunter User Guide | www.FlashForge.com
USB stick
icon.
[Print] icon to start printing.
6-6
51
400-699-1063