Pei Build Plate Installation - Flashforge Adventurer 3 Pro 2 User Manual

Note
Both sides are available. The gold PEI side
can be used to print PLA/PLA-CF/PETG-CF
High-Speed PLA. The other side can be used
to print PETG/High-Speed PETG. Please
choose according to the printing material.
1. Manually pull the platform base inside the
machine outward slightly to a suitable
position.
2. Take out a PEI build plate from the accessories, and align the side with a groove
inward with the two locating pins on the platform base.
Locating pins
3. When the locating pins just press against the
groove of the platform plate, align the platform
plate with the base along the outline of the
platform base, and lightly place the platform
plate and attach it on the platform base to
complete the installation.

2.3 PEI Build Plate Installation

PEI Flexible
Build Plate
Platform base
11