Flashforge Adventurer 3 Pro 2 User Manual page 42

Camera:
Turn on or turn off the camera.
For more details about Camera, please refer to Chapter 2.6.
Filament check:
To turn on/off the filament
check. When enabled, a
prompt will pop up when
filament is used up or
broken.
LED:
To turn on/off the light.
Buzzer Factory Reset
Update Extruder
3/4
Move Camera
Filament Check Led
2/4
Factory Setting
Delete all data
in internal memory
Start
39
Move Camera
Filament Check Led
2/4
Move Camera
Filament Check Led
2/4
Completed!
Restored to factory setting
OK