User Interface Introduction; Build - Flashforge Adventurer 3 Pro 2 User Manual

Note: The interface layout may change whenever there is an upgrade of firmware.
The functions below are only for demonstration purposes.

2.5.1 Build

1. Tap [Build].
3. File list
Tap to begin printing; tap the picture of the selected file to enter file details.
Page-flip: Tap the left/right arrow.
Long press the file picture or file name, and you can select all, copy
Tap to exit the multi-selection interface.
1/1

2.5 User Interface Introduction

2. Choose the print file reading
path.
1/1
1/1
30
Read the print file from:
The local memory card
The USB stick
The Cloud
Back: Back to the previous
interface
, or delete .