USER MANUAL
A6000
AC POWER SOURCE
3. Press
4. Change parameter to 200 by numerical key or knob, then press
change
3.14 Waveform Selection
Due to it needs time to do waveform calculation, DME-A602ABS SERIES provide A
and B two sets built in waveforms. User can select Sin, CSin, Squa or other self-defined
waveform from A or B set waveforms at CONFIG page, then go to SETUP page to set
output voltage waveform for main manual.
Following processes demonstrate how to change output waveform from A to B:
37
│ www.deltaww.com
or
to move the cursor to Is Interval
to confirm the