Waveform Selection - Delta A3000 User Manual

User Manual
A3000
AC Power Source
2. Change parameter to 500.0 by numerical key or knob, then press
change
Save
3. Press
4. Change parameter to 200 by numerical key or knob, then press
change

3.5.7 Waveform Selection

A3000 SERIES provide two sets built in waveforms A and B. User can select Sin, CSin, or
other self-defined waveform from A or B set at CONFIG page, then go to SETUP page to
set output voltage waveform for main manual.
Following processes demonstrate how to change output waveform from A to B：
1. Press
Page up Page down
25 │ www.deltaww.com
Recall
Save Recall
or to move the cursor to Is Interval
▲ ▼
▲ ▼
move to next page
to confirm the
Enter
to confirm the
Enter