Waveform Selection - Delta A1500 Series User Manual

User Manual
A1500
AC Power Source
2. Change parameter to 500.0 by numerical key or knob, then press
change
Save
3. Press
4. Change parameter to 200 by numerical key or knob, then press
change

3.5.7 Waveform Selection

A3000 SERIES provide two sets built in waveforms A and B. User can select Sin, CSin,
Squa or other self-defined waveform from A or B set at CONFIG page, then go to SETUP
page to set output voltage waveform for main manual.
Following processes demonstrate how to change output waveform from A to B：
1. Press
Page up Page down
27 │ www.deltaww.com
Recall
Save Recall
or to move the cursor to Is Interval
▲ ▼
▲ ▼
move to next page
to confirm the
Enter
to confirm the
Enter