Delta A6000 User Manual page 101

USER MANUAL
A6000
AC POWER SOURCE
:END
:DEGRee
PULSE
:VOLTage
:AC
:FREQuency
:SPHase
:COUNt
:DCYCle
:PERiod
STEP
:VOLTage
:AC
:DVOLtage
:AC
:FREQuency
:DFRequency
:SPHase
:DWELl
:COUNt
SYNThesis
:AMPLitude
:PHASe
TRIG
NPHase
VERion:DSP
VERion:LCM
VERion:UI
INSTrument:NSELect
SYSTem:ERRor
:1?
:2?
98 │ www.deltaww.com
Set (query) stop frequency for 10 individual sequences in
LIST mode.
Set (query) start phase angle for 10 individual sequences
in LIST mode.
Set (query) AC voltage of PULSE mode
Set (query) frequency of PULSE waveform
Set (query) start phase angle of PULSE waveform
Set (query) how many times to execute PULSE voltage
Set (query) execution time of PULSE waveform, it must
be no longer than total period in PULSE mode
Set (query) total period of PULSE mode
Set (query) start voltage for STEP mode.
Set (query) voltage change for each step in STEP mode.
Set (query) start frequency for STEP mode.
Set (query) frequency change for each step in STEP
mode.
Set (query) start phase angle at STEP mode.
Set (query) output duration for each step in STEP.
Set (query) how many steps to execute STEP mode.
Set (query) which synthesis waveform to use. There are
DST30, DST31 available
Set (query) voltage amplitude for each order of harmonic
waveforms.
Set (query) phase for each order of harmonic waveforms.
Set (query) trigger status. Disabled when OUTPut:MODE
= FIXE
Set (query) output mode:
Query firmware version.
Query firmware version used for LCM.
Query firmware version for UI.
Set specific output phase to responce queries
Query error status, must be used together with
INSTrument:NSELect command.
Query Φ1 error status
Query Φ2 error status