Delta A6000 User Manual page 88

USER MANUAL
A6000
AC POWER SOURCE
PULSE
:VOLTage
:FREQuency
:SPHase
:COUNt
:DCYCle
:PERiod
STEP
:VOLTage
:DVOLtage
:FREQuency
:DFRequency
:SPHase
:DWELl
:COUNt
SYNThesis
:AMPLitude
:PHASe
Following are functions, examples and returned parameters for SOURCE command:
[SOURce:]CURRent:LIMit
Function
Example
Parameter : <NR2> , effective range: 0.00~64.00 (150V range),
Parameter returns: <NR2>
[SOURce:]CURRent:DELay
Function
Example
Parameter : <NR2> , Effective range: 0.0~9.0 (unit: Sec)
Parameter returns: <NR2>
85 │ www.deltaww.com
:AC
Set (query) PULSE AC voltage
Set (query) PULSE frequency
Set (query) start phase angle of AC voltage of PULSE
Set (query) how many times to execute PULSE
Set (query) output duration of PULSE waveform, cannot be
longer than total period
Set (query) total period
:AC
Set (query) start voltage for STEP mode
:AC
Set (query) voltage change for each step at STEP mode
Set (query) start frequency at STEP mode
Set (query) frequency change for each step at STEP mode
Set (query) start phase angle at STEP mode
Set (query) output duration for each step at STEP mode
Set (query) how many steps for STEP mode
Set (query) which synthesis waveform to use. There are DST 30,
DST31 available
Set (query) harmonic voltage amplitude for each order
Set (query) harmonic phase angle for each order
: Set (query) total current limit Irms.
: [SOURce:]CURRent:LIMit?
[SOURce:]CURRent:LIMit 25.5
: Set (query) delay time to trigger software over current protection
: [SOURce:]CURRent:DELay?
[SOURce:]CURRent:DELay 1.2
0.00~32.00 (300V range)