Is Start, Is Interval - Delta A6000 User Manual

USER MANUAL
A6000
AC POWER SOURCE
4. Change parameter to 200 by numerical key or knob rotating, then press
confirm the setting

3.13 Is Start, Is Interval

Both the setting ranges for Is Start and Is Intervals are 0.0~1000.0 msec, these
parameters are for the surge current measurement.
Picture shown below indicates the measurement of the surge current start at Is Start
after output enabled, and measurement time is Is Interval:
For example: if Is Start = 500ms, Is Interval = 200ms, then Is measurement shown on
main manual is the maximum current measured between 500~700ms after output enabled.
Following processes demonstrate how to set Is Start = 500ms and Is Interval = 200ms:
35 │ www.deltaww.com
to