Power Led Module - OERTLI OS 4 Service Manual

11.2.2

Power LED module

VX210149
Quantity Description
1 Power LED module
2021-03-23 / Rev. 10 VV016042
STEP 1:
1. Remove the LEDplus light module
according to 11.2.1.
2.
Remove 2 screws from the under-
side of the module.
STEP 2:
3. Disconnect all cables from
core PCB.
Wires are tied together with wire ca-
ble ties – remove them carefully.
4. Pull module out of the unit in a side-
ways direction.
Be careful not to damage any wires!
5. Remove holder from the light mod-
ule and use it for the replacement
part.
96