12.3.4
Version 1.3.0
Files
OS 4-system_1.1.0.tar.gz
OS 4-apps_1.3.0.tar.gz
Displayed in service mode (tab "General") when installed:
App:
v1.3.0
System:
v1.1.0 OS 4-prod-image
Specific upgrading procedure
1.
Make sure that version 1.2.0 is installed on the device (12.3.5)
Update the operating system package according to 12.2.
2.
Update the application package according to 12.2.
3.
After updating the OS 4 application software from version 1.2.0 to 1.3.0 the pedal assignments remain
unchanged and the new parameters influencing the pedal section assignments (e.g. Reflux Position)
are not in effect. In this state, none of the "Assignment" buttons for pedal section assignments are se-
lected in ParaProg. To use the new pedal section assignments and the new parameters influencing the
pedal section assignments for a certain surgeon and function, press one of the "Assignment" buttons
and save the settings in ParaProg.
12.3.5
Version 1.2.0
Files
OS 4-system_1.0.0.tar.gz
OS 4-apps_1.2.0.tar.gz
Displayed in service mode (tab "General") when installed:
App:
v1.2.0
System:
v1.0.0 OS 4-prod-image
Specific upgrading procedure
1.
Make sure that version 1.1.0 is installed on the device (12.3.5)
Update the application package according to 12.2.
2.
12.3.6
Version 1.1.0
Files
OS 4-system_1.0.0.tar.gz or OS 4-system.tar.gz
OS 4-apps_1.1.0.tar.gz or OS 4-apps.tar.gz
Displayed in service mode (tab "General") when installed:
App:
v1.1.0
System:
v1.0.0 OS 4-prod-image
Specific upgrading procedure
Update the application package according to 12.2.
1.
2021-03-23 / Rev. 10
VV016042
107